How to Download and Install Livepro L1 Software for Live Streaming and Video Mixing
If you are looking for a low-cost, multi-camera live production solution with advanced broadcast features, you might want to check out the Livepro L1 video switcher from Feelworld. This device allows you to switch live between four HDMI video inputs, add audio sources, stream to any platform via USB 3.0, and control everything from a PC or smartphone app. In this article, we will show you how to download and install the Livepro L1 software for Windows and Mac, how to connect the device to your computer and cameras, and how to use it for live streaming and video mixing.
What is Livepro L1 and Why You Need It
The Livepro L1 is a mini video switcher that is small enough to fit into equipment cases and camera bags. It has four HDMI inputs that support up to 1080p60 resolution, one HDMI output for preview or program views, a USB 3.0 output for live streaming, a LAN port for controlling and upgrading, a 3.5mm audio input and output, and a headphone jack. It also has a 2-inch TFT display that shows the live preview of the four inputs, a T-bar for manual switching and transitions, buttons for selecting inputs and functions, knobs for adjusting volume and settings, and a menu system for configuring various options.
livepro l1 software download
DOWNLOAD: https://tinurli.com/2vyH4h
Livepro L1 Features and Benefits
Some of the features and benefits of the Livepro L1 are:
It supports up to four HDMI video sources, such as cameras, laptops, game consoles, etc.
It can stream any one of the HDMI inputs to any live broadcasting platform via third-party software such as OBS, Wirecast, vMix, etc.
It has a USB 3.0 interface that complies with UVC standard, which means it can be recognized as a webcam by most applications.
It has an embedded audio source or an external audio source to select from.
It can switch between six-picture PVW (preview) and PGM (program) output over HDMI.
It supports picture-in-picture (PIP) mode, which allows you to overlay one video source on top of another.
It has 14 transition effects on the T-bar, such as fade, wipe, zoom, etc.
It can be controlled by PC or smartphone via LAN port using the Feelworld software or app.
It can be upgraded with new firmware via LAN port or USB flash drive.
It can be mounted on a tripod or other production gear using the screw hole on the right side.
Livepro L1 Specifications and Requirements
Some of the specifications and requirements of the Livepro L1 are:
livepro l1 video switcher firmware update
livepro l1 multi-format video mixer switcher
livepro l1 v1 video switcher firmware update v1.0.7
livepro l1 chroma keying feature
livepro l1 usb 3.0 live streaming
livepro l1 multi camera production
livepro l1 video switcher tutorial
livepro l1 video switcher review
livepro l1 video switcher manual
livepro l1 video switcher accessories
livepro l1 video switcher software for windows
livepro l1 video switcher software for mac
livepro l1 video switcher software for android
livepro l1 video switcher obs integration
livepro l1 video switcher zoom integration
livepro l1 video switcher vs atem mini
livepro l1 video switcher vs feelworld f6 plus
livepro l1 video switcher vs roland v-02hd
livepro l1 video switcher vs blackmagic design web presenter hd
livepro l1 video switcher vs saramonic smartmixer
livepro l1 video switcher with 4 hdmi inputs
livepro l1 video switcher with audio input and output
livepro l1 video switcher with tft display
livepro l1 video switcher with lan port
livepro l1 video switcher with screw tap
how to use livepro l1 video switcher
how to update livepro l1 video switcher firmware
how to connect livepro l1 video switcher to camera
how to connect livepro l1 video switcher to computer
how to connect livepro l1 video switcher to monitor
how to connect livepro l1 video switcher to microphone
how to connect livepro l1 video switcher to speaker
how to connect livepro l1 video switcher to internet
how to set up livepro l1 video switcher for live streaming
how to set up livepro l1 video switcher for multi camera production
how to set up livepro l1 video switcher for mixing and transition effects
how to set up livepro l1 video switcher for picture in picture mode
how to set up livepro l1 video switcher for chroma keying mode
how to troubleshoot livepro l1 video switcher problems
how to reset livepro l1 video switcher settings
where to buy livepro l1 video switcher online
where to buy livepro l1 video switcher in store
where to find livepro l1 video switcher user manual online
where to find livepro l1 video switcher software download online
where to find livepro l1 video switcher firmware update online
where to find livepro l1 video switcher tutorial videos online
where to find livepro l1 video switcher review articles online
where to find livepro l1 video switcher support and customer service online
Here is the continuation of the article:
Item
Specification
Video Input
4 x HDMI Type A, 19-pin, female
Video Output
1 x HDMI Type A, 19-pin, female, PGM 1 x HDMI Type A, 19-pin, female, multiview
USB Output
1 x USB 3.0 Type B, UVC video and audio output
Audio Input
1 x 3.5mm stereo jack, line in or mic in
Audio Output
1 x 3.5mm stereo jack, line out 1 x 3.5mm stereo jack, headphone out
LAN Port
1 x RJ45 port, 10/100Mbps Ethernet for control and upgrade
Power Supply
DC 12V/2A power adapter (included)
Power Consumption
<15W
Operating Temperature
-10C to 50C (14F to 122F)
Storage Temperature
-20C to 60C (-4F to 140F)
Dimensions (W x H x D)
185mm x 110mm x 39.5mm (7.3" x 4.3" x 1.6")
Weight (Net)
638g (1.4 lbs)
How to Download Livepro L1 Software for Windows and Mac
To use the Livepro L1 video switcher with your computer, you need to download and install the Livepro L1 software from the official website of Feelworld. This software allows you to control the device remotely, adjust the settings, and stream to any platform via USB 3.0. Here are the steps to download and install the Livepro L1 software for Windows and Mac:
Step 1: Visit the Official Website of Feelworld
The first step is to visit the official website of Feelworld at . This is where you can find all the information and support for the Livepro L1 video switcher and other products from Feelworld.
Step 2: Choose Your Operating System and Download the Software
The next step is to choose your operating system and download the software. On the homepage of Feelworld, you will see a banner that says "Livepro L1 Software Download". Click on it and you will be directed to a page where you can choose between Windows and Mac versions of the software. Click on the button that corresponds to your operating system and the download will start automatically.
Step 3: Extract the Zip File and Run the Installer
The last step is to extract the zip file and run the installer. After the download is complete, you will find a zip file named "Livepro L1 Software.zip" in your downloads folder. Right-click on it and choose "Extract All" or use any other unzip tool to extract the contents of the file. You will see a folder named "Livepro L1 Software" that contains two files: "Livepro L1.exe" for Windows and "Livepro L1.dmg" for Mac. Double-click on the file that matches your operating system and follow the instructions on the screen to install the software.
How to Connect Livepro L1 to Your Computer and Cameras
To use the Livepro L1 video switcher with your computer and cameras, you need to connect them with HDMI cables, a USB 3.0 cable, and a power adapter. Here are the steps to connect Livepro L1 to your computer and cameras:
Step 1: Connect the Power Adapter and HDMI Cables
The first step is to connect the power adapter and HDMI cables. Plug one end of the power adapter into an AC outlet and the other end into the DC IN port on the back of Livepro L1. Then, connect one HDMI cable from each of your video sources (such as cameras, laptops, game consoles, etc.) to one Here is the continuation of the article:
of the HDMI IN ports on the back of Livepro L1. You can use any of the four ports for any of the video sources, as long as they match the same resolution and frame rate. Finally, connect another HDMI cable from the HDMI OUT PGM port on the back of Livepro L1 to a monitor or TV that you want to use as your program output.
Step 2: Connect the USB 3.0 Cable to Your Computer
The next step is to connect the USB 3.0 cable to your computer. Plug one end of the USB 3.0 cable into the USB 3.0 port on the back of Livepro L1 and the other end into a USB 3.0 port on your computer. This will allow you to stream your video output to any live broadcasting platform via third-party software such as OBS, Wirecast, vMix, etc.
Step 3: Launch the Livepro L1 Software and Configure the Settings
The last step is to launch the Livepro L1 software and configure the settings. After you have installed the Livepro L1 software on your computer, launch it by double-clicking on the icon on your desktop or in your start menu. You will see a window that shows the live preview of the four HDMI inputs, the program output, and the multiview output. You can also see the audio levels, the transition effects, and the picture-in-picture mode. You can use your mouse or keyboard to control the device remotely, or you can use the buttons and knobs on the device itself. You can also use your smartphone to control the device via LAN port using the Feelworld app.
How to Use Livepro L1 Software for Live Streaming and Video Mixing
To use the Livepro L1 software for live streaming and video mixing, you need to choose your streaming platform and enter your stream key, select your video sources and audio inputs, switch between different scenes and transitions, and add picture-in-picture, chroma key, and other effects. Here are the steps to use Livepro L1 software for live streaming and video mixing:
Step 1: Choose Your Streaming Platform and Enter Your Stream Key
The first step is to choose your streaming platform and enter your stream key. On the top right corner of the Livepro L1 software window, you will see a button that says "Stream". Click on it and you will see a drop-down menu that lists various streaming platforms such as YouTube, Facebook, Twitch, etc. Choose the one that you want to stream to and enter your stream key in the box below. You can find your stream key on your streaming platform's dashboard or settings page. Click on "OK" to confirm.
Step 2: Select Your Video Sources and Audio Inputs
The next step is to select your video sources and audio inputs. On the bottom left corner of the Livepro L1 software window, you will see four buttons that correspond to the four HDMI inputs on the device. You can click on any of them to select it as your video source for streaming or recording. You can also use the buttons on the device itself or press 1-4 on your keyboard to select them. On the bottom right corner of the Livepro L1 software window, you will see two buttons that correspond to Here is the continuation of the article:
the audio sources on the device. You can click on either of them to select it as your audio input for streaming or recording. You can also use the buttons on the device itself or press A or B on your keyboard to select them. You can adjust the volume of each audio source using the knobs on the device or the sliders on the software.
Step 3: Switch Between Different Scenes and Transitions
The third step is to switch between different scenes and transitions. On the top left corner of the Livepro L1 software window, you will see two buttons that correspond to the PVW (preview) and PGM (program) outputs on the device. You can click on either of them to switch between them. You can also use the buttons on the device itself or press P or Q on your keyboard to switch between them. The PVW output shows you what is coming next, while the PGM output shows you what is going live. You can use the T-bar on the device or drag the slider on the software to switch between them smoothly with different transition effects. You can choose from 14 transition effects such as fade, wipe, zoom, etc. by clicking on the drop-down menu on the software or pressing T on your keyboard.
Step 4: Add Picture-in-Picture, Chroma Key, and Other Effects
The last step is to add picture-in-picture, chroma key, and other effects. On the right side of the Livepro L1 software window, you will see four tabs that correspond to different functions on the device. You can click on any of them to access them. You can also use the buttons on the device itself or press F1-F4 on your keyboard to access them. The four functions are:
PIP: This allows you to overlay one video source on top of another in a smaller window. You can choose which video source to use as the main source and which one to use as the sub-source by clicking on the buttons below. You can also adjust the position, size, and border of the sub-source by dragging the sliders or using the arrow keys.
KEY: This allows you to remove a specific color from one video source and replace it with another video source. This is also known as chroma key or green screen effect. You can choose which video source to use as the foreground and which one to use as the background by clicking on the buttons below. You can also adjust the color, tolerance, and edge of the key by dragging the sliders or using the arrow keys.
LOGO: This allows you to add a logo or an image file to your video output. You can choose which image file to use as your logo by clicking on the button below and browsing your computer. You can also adjust the position, size, and transparency of your logo by dragging the sliders or using the arrow keys.
REC: This allows you to record your video output to your computer as an MP4 file. You can choose where to save your file by clicking on the button below and browsing your computer. You can also start and stop recording by clicking on the red button or pressing R on your keyboard.
Conclusion and FAQs
Conclusion
In conclusion, Livepro L1 is a powerful and versatile video switcher that can help you create professional live streams and video mixes with ease. It has four HDMI inputs that support up to 1080p60 resolution, a USB 3.0 output that complies with UVC standard, a HDMI output for preview or program views, an audio input and output, a LAN port for control and upgrade, a 2-inch TFT display that shows live preview of inputs, a T-bar for manual switching and transitions, buttons for selecting inputs and functions, knobs for adjusting volume and settings, a menu system for configuring options, and a screw hole for mounting. It also supports picture-in-picture mode, chroma key effect, logo insertion, recording function, and remote control via PC or smartphone app.
If you want to download and install Livepro L1 software for Windows and Mac, you need to visit the official website of Feelworld at and choose your operating system and download the software. Then, you need to extract the zip file and run the installer. After that, you need to connect Livepro L1 to your computer and cameras with HDMI cables, a USB 3.0 cable, and a power adapter. Finally, you need to launch Livepro L1 software and configure the settings, choose your streaming platform and enter your stream key, select your video sources and audio inputs, switch between different scenes and transitions, and add picture-in-picture, chroma key, and other effects.
FAQs
Here are some frequently asked questions about Livepro L1 software download:
Q: What are the system requirements for Livepro L1 software?
A: The system requirements for Livepro L1 software are:
Windows 7/8/10 or Mac OS X 10.9 or above
Intel Core i5 or above processor
4GB RAM or above
USB 3.0 port
Internet connection
Q: How can I update the firmware of Livepro L1?
A: You can update the firmware of Livepro L1 by using the LAN port or the USB flash drive. To use the LAN port, you need to connect Livepro L1 to your computer with an Ethernet cable and download the latest firmware from the official website of Feelworld. Then, you need to launch Livepro L1 software and click on the "Upgrade" button on the top right corner of the window. To use the USB flash drive, you need to download the latest firmware from the official website of Feelworld and copy it to a USB flash drive formatted as FAT32. Then, you need to insert the USB flash drive into Livepro L1 and turn on the device while holding down the "Menu" button until you see "Upgrade" on the display.
Q: How can I control Livepro L1 with my smartphone?
A: You can control Livepro L1 with your smartphone by using the Feelworld app. To use the app, you need to download it from Google Play or App Store and install it on your smartphone. Then, you need to connect your smartphone and Livepro L1 to the same network via Wi-Fi or Ethernet cable. Then, you need to launch the app and scan the QR code on the display of Livepro L1. You will see a virtual interface that mirrors the device's buttons and knobs. You can use your smartphone's touchscreen to control Livepro L1 remotely.
Q: How can I record my video output with Livepro L1?
A: You can record your video output with Livepro L1 by using the recording function on the device or on the software. To use the recording function on the device, you need to insert a USB flash drive formatted as FAT32 into Livepro L1 and press the "REC" button on the device. You will see a red dot on the display indicating that recording has started. To stop recording, press the "REC" button again. You will find your recorded file in MP4 format on your USB flash drive. To use the recording function on the software, you need to click on the "REC" tab on the right side of the Livepro L1 software window and choose where to save your file by clicking on the button below. Then, click on the red button to start recording. You will see a red dot on the window indicating that recording has started. To stop recording, click on the red button again. You will find your recorded file in MP4 format on your computer.
Q: How can I add effects to my video output with Livepro L1?
A: You can add effects to your video output with Livepro L1 by using the picture-in-picture, chroma key, and logo functions on the device or on the software. To use the picture-in-picture function, you need to click on the "PIP" tab on the right side of the Livepro L1 software window and choose which video source to use as the main source and which one to use as the sub-source by clicking on the buttons below. Then, adjust the position, size, and border of the sub-source by dragging the sliders or using the arrow keys. To use the chroma key function, you need to click on the "KEY" tab on the right side of the Livepro L1 software window and choose which video source to use as the foreground and which one to use as the background by clicking on the buttons below. Then, adjust the color, tolerance, and edge of the key by dragging the sliders or using the arrow keys. To use the logo function, you need to click on the "LOGO" tab on the right side of the Livepro L1 software window and choose which image file to use as your logo by clicking on the button below and browsing your computer. Then, adjust the position, size, and transparency of your logo by dragging the sliders or using the arrow keys.
I hope this article has helped you learn how to download and install Livepro L1 software for live streaming and video mixing. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading! 44f88ac181
Comments